A corner flat can be found in the end of the construction: that is, domikday.ru part of its walls aren’t adjacent to the neighbours, but would be the outer partitions of the home.

There can be one apartment in a corner flat – it occupies the whole end of the home, it’s likewise called a corner apartment. Or 2 – the windows of one forget the street, the next – the lawn. Depends on the building plan, the layout of the premises.

There is also a”separate caste” – housing with walls at the expansion joints. These”gaps” between entrances are usually made in multi-story buildings, the principal job of the unit – to split the deformation forces during the shrinkage of the construction, in case of crises. Pros and cons of corner apartments in the joint are slightly different from the conventional ones with access to the road – we’ll pay special attention to this topic in the previous section.


Considering that the 2-3 sides of this room is outdoors, in winter it’s 3-5C colder, and in summertime on the opposite – sexier. Particularly if the conclusion of the home is heated by the sun. In some cases, the gap reaches 10C – but such a distinction is unacceptable, indicates a problem with the outside the home – most probably have to contact the management company, asking (or forcing) to fulfill their direct responsibilities, to spot the cracks formed.

Corner flat in a brick home with thick walls is more comfy. Such dangers aren’t exposed – the thickness of the wall acts as a buffer, not letting overheating, overcooling.


When an area has only one wall combined with the street, it generally has enough room warmth to avoid freezing and condensation. But if there are two outdoor walls, and they are adjacent – there is a higher probability of freezing at the corner, the formation of condensation inside, and therefore – mold, fungus. Their spores not just spoil the appearance of the room, but also cause the appearance, complication of many serious ailments.

Important! The problems of corner place are justified when the factors are linked – too low temperatures from heating batteries combined with dampness is guaranteed to result in moldy walls.