The summer shower around the dacha plot is regarded as the No. 2 structure, as the first in importance is your outside toilet. At first glance, this simple construction has nothing complicated, but such a trifle as the selection and setup of a plastic tank to the shower in the dacha will bring a lot of difficulty. The way to manage all these nuances on their own, we will now try to understand. Without or with heating

Before you choose a tank for the shower at the nation need to decide on its own functionality. On if this plastic container is going to be equipped with heating system, is contingent on the comfort of bathing. There are two Kinds of tanks used in dacha showers:

  • Multifunctional and handy to utilize is a heated shower tank, also working on power. Obviously, and without linking to power this tank can be utilized, however in this is the relaxation of carrying water procedures. The simple fact is that inside the plastic container is a heating component – TEH. If the sun did not have the time to warm water, this problem can easily be solved with power. It’s convenient to install a tank with heating system, in the event the shower is going to be utilised in early spring and late fall. Hot summer days, the water in the tank will be heated by sunlight, so in this period, the heating system is simply not comprised.
  • A plastic tank with no heating is a normal tank, including a barrel mounted in the roof of a bathtub home. The water from the tank is heated from sunlight. That is, when the weather is wet and muddy, it is possible to take just a refreshing shower or deny to wash in any respect. Tanks without heating is appropriate to put in the event the cottage is visited very rarely, and then just in summertime.

The primary difference between those tanks just installed heating component. Shape, volume, and colour of the product can be quite different. It is important that any chosen tank had a broad neck, easy to pour water also was firmly attached to the roof of the shower house.

Suggestion: Flat black tanks are somewhat effective. A huge area of a thin coating of water will be heated faster by sunlight. Black walls of the tank draw the sun’s rays, in addition to the water within the tank does not blossom.

Design includes of vinyl shower tanks

Vinyl shower tanks for summer houses are especially popular with consumers for Many reasons;

  • A special essay of plastic is employed to produce the tanks, which increases the product’s lifespan for 30-50 decades. At precisely the same point, plastic tanks for summer showers are characterized by a moderate cost, light weight and ease of setup. All you have to do is build the shower boxand correct the tank on top instead of the roof.
  • At the manufacture of shower tanks, so many manufacturers utilize food-grade polyethylene, which does not detract from exposure to UV rays. Environmentally friendly material guarantees the safety of water even during long-term storage. Plastic does not corrode under most conditions, which cannot be said about metal.

When selecting a plastic tank should know that the tanks with no electric heating most frequently are created in bulk by 100 to 200 liters. Round heated tanks are created in the kind of drums using a volume of 50 to 130 liters of water. Flat heated tanks are usually designed for 200 liters of liquid. In any style, water is poured in buckets via a broad neck or by pump.

Polycarbonate shower for state houses with their own hands

Rarely does anyone in the dacha build a capital shower made from brick or cinder block. Usually its usage is limited to 3 summertime and after that during the planting of their vegetable garden, as well as harvesting. For this short period it is enough to construct a light cabin in some other sheet material. Not a terrible solution is a shower for dacha from polycarbonate with a living area, which is not difficult to design and make yourself. Why it is better to choose polycarbonate for liner the shower

Polycarbonate is not the only material to get a dacha shower. For this instance with victory will match exactly the profiled sheeting or batten. Just today we decided to stop just on this beautiful and durable material.

Let us consider the advantage of utilizing polycarbonate for repainting the shower over other similar substances:

  • In the event the advantages of polycarbonate have persuaded you, let us proceed to the next phase of building a shower for dacha.
  • A few important tips Concerning the development of the layout of a Nation shower using a changing room

Such a simple construction, as a shower out of polycarbonate for dacha requires the production of the project. It’s not necessary to construct complex drawings, and also a simple scheme could be sketched out. Here you need to immediately decide for yourself what you want to construct a shower. Very quickly you may create a lightweight stall and only put it on the ground. More complicated in the production of shower to the base with warm water heating, but such a design will probably last longer. Moreover, in a dacha shower you’ll have the ability to bathe in sunlight.

So, we begin to independently create a project:

  • Construction of a dacha shower begins with determining its location. It is crucial to mention that the tank should be constantly full of water. Carrying it in buckets from afar is uncomfortable and difficult. It is better to put the shower stall near the water consumption.
  • If the dacha shower will probably bathe a good deal of people, it should be put as close as possible into the cesspool or septic tank. Close installation dacha shower near the cesspool will rescue on laying sewer pipes, however it’s desirable to not bring the stall nearer to the accumulator of impurities nearer than 3 m. On hot days, bad smells in the sewer system will permeate the shower, making an unpleasant feeling whilst bathing.
  • The water from the tank of a summer shower is warmed by the sun. The stall should be placed in the sunniest location, where there is not any shade from trees and tall constructions.
  • In the shower booth and altering room from polycarbonate should provide light, which means that you can bathe during the night. Only it’s necessary to consider that the lights should have a high level of protection against water. It is optimal to put shower cabins on the back of the house. Here are closest to this sewer, water source and not far to pull the electric cable for lighting.
  • Decided on the positioning of the area of this summer shower, begin to produce a plot of the cabin itself from polycarbonate. Originally it was decided that the backyard shower will probably be using all the changing room. In the event the normal for the magnitude of the conventional shower stall 1x1h2,2 m, then the locker area will need to bring a length of about 0.6 m. In cases like this, the diameter of the layout will turn out 1 m, and the span of 1,6 m. If the owners are overweight individuals, then the diameter of the shower cubicle with a locker room is better to increase 1.2 m.
  • in the shower stall provide separation. Separate the dressing room threshold, in addition to tarpaulin curtain. They won’t allow the water to wet shoes and clothes.
  • If desired, the dressing room can be organized from the anteroom. Then, near the shower enclosure separately install additional racks, to which fasten sheets of polycarbonate. The size of this pre-bath is dependent upon the preferences of the operator. Occasionally cottagers build bigger pre-baths in which, along with the dressing room, equip a recreation room. Inside you will find seats and a desk.
  • The entire height of this shower cabin from floor to roof is 2.2 m. Together with the tank it can achieve 2.5 m, and even greater. The height inside the shower stall will be lower. Section of the distance below will take a wooden menu, along with the shirt will probably hang on a watering can with a faucet less than 15 cm.

Given all these nuances, on a bit of paper sketches the scheme of the shower with a polycarbonate dressing area, and then proceed into its construction.