In this report we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks which you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other regions of the home, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it is really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so that you get something that looks like a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Be sure that the edges are cut so the edges aren’t sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the gas mask for dog paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you are done, so you don’t wind up with smudges or smears on your dog.

Then it is time to paste the mask onto your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can begin to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Be certain it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged firmly onto the face of your dog. Don’t make the folds too big or else it could look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Make certain that the ears are level and make sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask as your pet security, you will have to do some sanding to make certain it is secure on your dog. You can do it by sanding off any excess paper which might have been removed from your mask.